XE Type: Gundrill rotates/ workpiece fixed on the fixture
•XE type machines are suitable for the productionof small & medium components shafts, mandrels
•Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
•Hardened and ground Main slide ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated withhand scraped bearing surface.
•Suspending type operate panel and MPG(Hand wheel) for easier setting and operation.
•Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
•The machine could be designed to 1~4 spindles and controlled by Fanuc or Mitsubishi CNC controller for special purpose.
•CE mark are available for special required.
Application:
Specification
Model No.
XE-500
XE-1000
Drill Capacity
Hole dia
Ø3~Ø12 mm, Ø10~Ø25 mm(Option)
Max. depth (Z)
500 mm
1000 mm
No. of spindle
1~4 spindles
Power
Spindle motor
3~5 HP (with inverter)
Drill spindle feed (Z)
Servo motor 850~1300W / 5.39~8.34 N.M.
High pressure motor
3~7.5 HP
Speed
Max. spindle speed
6000 rpm
Drill Speed
10~150 mm / min
Rapid
5000 mm / min
Ball screw for feeds
Spindle infeed(Z)
Ø40 x P10 x C3
High pressure pump (Every spindle one set)
Pump output
40~150 Liter / min
Max. pressure
100~150 kgs / cm²
Coolant tank
800~1600 Liter
Floor space
3000 x 3300 mm
3000 x 4300 mm
Net weight
2100 kgs
2600 kgs
Standard accessories
1.High pressure coolant pump 2.Automatic lubricator 3.Tool box with tools
Optional accessories
1.Magnetic separator + Paper filter unit 2.Chip conveyor 3.Coolant cooler 4.Gundrill grinder 5.Special clamping fixture for special purpose 6.Special designed auto-loading & unloading device 7.CE Certificate
